Lower arm bush for pre 1966 cars. The lower arm had a straight hole whereas the later cars from 1966 on had a tapered hole and used 21A1882 bush with a metal sleeve in. This bush has no inner sleeve and it was discontinued in 1966.
Sold single. 2 required per arm-4 per car
Tech note: If you are unsure if you have the ‘straight’ or the ‘taper’ type of arm; a quick way to tell is to place a finger inside the lower control arm (where the bush goes), if you can feel a ridge in the middle where the two bushes meet then this is the 21A1882 bush type arm. If it is dead straight with no ridge, then it will take the 2A4294 type bush.
