The Used Open-Box Foredom K.2293 PowerGraver Kit is a dedicated, all-in-one power-assist system engineered for stone setting and engraving operations. Ideal for bead, prong, channel, hammer, and bezel setting, as well as engraving and other decorative work, this kit delivers the precision and control professionals demand at the bench. This open-box customer return shows signs of previous use, including cosmetic wear and handling marks, while retaining the same core functionality as the original kit.
At the heart of the system is the M.PGX Permanent Magnet Motor a low-speed design rated to a maximum of 2,800 RPM and built for high-torque, low-speed applications. Permanently lubricated ball bearings ensure quiet, trouble-free performance over extended use. The unit comes equipped with a special extra-flexible neoprene sheath and a 6-foot power cord. Cosmetic dust and signs of handling may be present on the motor housing.
The H.9D Handpiece works and feels like a traditional hand engraving tool, while adding greater control and adjustable impact force. Its collet-type design accepts 3/32″, 3mm, and 1/8″ collets. This used open-box handpiece shows cosmetic scratches from prior handling and use. Note: The H.9D handpiece features a special quick-disconnect that fits only the M.PGX motor sheath included in this kit it is not compatible with other Foredom motors.
The Foredom PowerGraver handpiece works with all gravers; however, pre-cut GRS gravers are ready to use without additional shaping to fit the handpiece. The original retail packaging is included and has been re-taped due to handling.
Features
- Used open-box customer return with cosmetic signs of previous wear and handling
- Dedicated PowerGraver system optimized for stone setting and engraving
- M.PGX Permanent Magnet Motor with up to 2,800 RPM maximum speed
- High-torque, low-speed motor design for precise control
- Permanently lubricated ball bearings for quiet, long-lasting performance
- H.9D Handpiece mimics the feel of a hand engraving tool with adjustable impact force
- Collet-type handpiece accepts 3/32″, 3mm, and 1/8″ collets
- C.EMGX-1 Dial Speed Control varies speed from off to 2,800 RPM
- C.FCGX On/Off Foot Switch for hands-free motor control
- Extra-flexible neoprene sheath for comfortable, unrestricted movement
- 6-foot power cord
- Original box included and re-taped due to handling
Specifications
| Model | K.2293 |
|---|---|
| Condition | Used Open-Box Customer Return |
| Motor | M.PGX Permanent Magnet Motor |
| Maximum Speed | 2,800 RPM |
| Power Cord Length | 6 feet (1.83 m) |
| Sheath Type | Extra-flexible neoprene |
| Handpiece | H.9D (fits only M.PGX motor sheath) |
| Collets Included | 3/32″, 3mm, 1/8″ |
| Brand | Foredom |
What’s Included
- M.PGX Permanent Magnet Motor
- H.9D Handpiece with 3/32″, 3mm, and 1/8″ collets
- C.EMGX-1 Dial Speed Control (Off to 2,800 RPM)
- C.FCGX On/Off Foot Switch (Momentary On)
- AK290 Accessory Kit: HP10215 Carbide Stylus, HP10177P Anvil Point, Graver 52 Round, Graver 3 Onglette, Graver 2 Bevel, Graver 40 Flat
- Flexible Shaft Grease
- Handpiece Oil
- Original retail box (re-taped due to handling)
Notes
- This used open-box item was returned by a customer and shows cosmetic signs of previous wear, including dust on the hanging motor and scratches on the handpiece.
- Cosmetic wear does not affect the intended operation of the system.
- The H.9D handpiece quick-disconnect fits only the M.PGX motor sheath in this kit and will not work with other Foredom motors.
- Pre-cut GRS gravers are ready to use with the PowerGraver handpiece without additional shaping.
- This product is subject to California Proposition 65 warnings (Beryllium, Nickel, Lead).
